update Home PC 22 May 2026

Acoustics Test/Acoustic library/Calibrations.ini

@@ -9,6 +9,10 @@ USB Audio Device IN 4 = 1
 [Output]
 Speakers (USB PnP Audio Device) L = 0.920000
 Speakers (USB PnP Audio Device) R = 0.920000
+USB Audio Device Analogue 1 = 2.47
+USB Audio Device Analogue 2 = 2.47
+USB Audio Device Analogue 3 = 2.47
+USB Audio Device Analogue 4 = 2.47
 
 [Amp]
 Speakers (USB PnP Audio Device) - Amp L = 14.904000

Acoustics Test/builds/Calibration/Calibrations.ini

@@ -3,12 +3,30 @@ Microphone (USB PnP Audio Device) L = 1.07
 Microphone (USB PnP Audio Device) R = 1.07
 Microphone (3- USB PnP Audio Device) L = 1.028740
 Microphone (3- USB PnP Audio Device) R = 1.034020
+USB Audio Device IN 1 = 0.0004    
+USB Audio Device IN 2 = 0.0004 
+USB Audio Device IN 3 = 0.0004 
+USB Audio Device IN 4 = 0.0004
+USB Audio Device IN 5 = 0.0004    
+USB Audio Device IN 6 = 0.0004 
+USB Audio Device IN 7 = 0.0004 
+USB Audio Device IN 8 = 0.0004  
 
 [Output]
 Speakers (USB PnP Audio Device) L = 0.920000
 Speakers (USB PnP Audio Device) R = 0.920000
+Speakers (USB Advanced Audio Device) L = 0.920000
+Speakers (USB Advanced Audio Device) R = 0.920000
 Speakers (3- USB PnP Audio Device) L = 0.920000
 Speakers (3- USB PnP Audio Device) R = 0.920000
+USB Audio Device Analogue 1 = 0.400000    
+USB Audio Device Analogue 2 = 0.400000
+USB Audio Device Analogue 3 = 0.400000
+USB Audio Device Analogue 4 = 0.400000
+USB Audio Device Analogue 5 = 0.400000
+USB Audio Device Analogue 6 = 0.400000
+USB Audio Device Analogue 7 = 0.400000
+USB Audio Device Analogue 8 = 0.400000
 
 [Amp]
 Speakers (USB PnP Audio Device) - Amp L = 14.904000

Acoustics Test/library/Package/Calibration/Calibrations.ini

@@ -9,6 +9,10 @@ Speakers (USB PnP Audio Device) L = 0.920000
 Speakers (USB PnP Audio Device) R = 0.920000
 Speakers (3- USB PnP Audio Device) L = 0.920000
 Speakers (3- USB PnP Audio Device) R = 0.920000
+USB Audio Device Analogue 1 = 2.47
+USB Audio Device Analogue 2 = 2.47
+USB Audio Device Analogue 3 = 2.47
+USB Audio Device Analogue 4 = 2.47
 
 [Amp]
 Speakers (USB PnP Audio Device) - Amp L = 14.904000

Acoustics Test/raspberry Pi Pico/main.py

@@ -0,0 +1,431 @@
+import sys, machine, time, json
+import binascii
+
+config = {'type': 'undefined', 'no': 'undefined', 'count': 0}
+config_file = "config.json"
+
+##########################################################
+command_info = [
+    { "cmd": "ping", "descript": "return OK if mico controller board works normal" },
+    { "cmd": "reset", "descript": "reboot mico controller board" },
+    { "cmd": "get_config", "descript": "read configuration from mico controller board",
+      "parameters": [
+          { "config_item_name": "config item to read, if not provide will return all config values" }
+      ],
+      "example": "> get_config count\n    < 0\n    > get_config\n    < {'no': 'undefined', 'type': 'undefined', 'count': 0}"
+    },
+    { "cmd": "set_config", "descript": "set configuration to mico controller board",
+      "parameters": [
+          { "config_item_name": "config item name" },
+          { "config_item_value": "config item value " }
+      ],
+      "example": ">set_config sn 'CONTROLLER-001'"
+    },
+    { "cmd": "gpio_init", "descript": "initial gpio pin",
+      "parameters": [
+          { "pin_num": "gpio pin number" },
+          { "gpio direction": "0 - input, 1 - output" },
+          { "initial status": "initial status of gpio pin, 0 - low, 1 - high" },
+          { "pull control": "UP - enable pull up, DOWN - enable pull down, others - disable pull function"}
+      ],
+      "example": ">gpio_init 1 1 1 UP"
+    },
+    { "cmd": "gpio_set", "descript": "set gpio pin status",
+      "parameters": [
+          { "pin_num": "gpio pin number" },
+          { "pin status": "initial status of gpio pin, 0 - low, 1 - high" }
+      ],
+      "example": ">gpio_set 1 0"
+    },
+    { "cmd": "gpio_get", "descript": "get gpio pin status",
+      "parameters": [
+          { "pin_num": "gpio pin number" }
+      ],
+      "example": ">gpio_get 1"
+    },
+    { "cmd": "i2c_cleanup", "descript": "release i2c bus" },
+    { "cmd": "i2c_scan", "descript": "scan i2c devices" },
+    { "cmd": "i2c_read", "descript": "perform read operation from i2c device",
+      "parameters": [
+          { "device": "i2c slave device address" },
+          { "length": "bytes to read" }
+      ],
+      "example": ">i2c_read 0x20 1\n    <succeed: 0xFF"
+    },
+    { "cmd": "i2c_read_add", "descript": "perform read operation from i2c device with register address",
+      "parameters": [
+          { "device": "i2c slave device address" },
+          { "addr": "register address" },
+          { "length": "bytes to read" }
+      ],
+      "example": ">i2c_read_add 0x20 0 2\n    <succeed: 0xFF 0x01"
+    },
+    { "cmd": "i2c_write", "descript": "perform write operation to i2c device ",
+      "parameters": [
+          { "device": "i2c slave device address" },
+          { "data": "bytes to write" }
+      ],
+      "example": ">i2c_write 0x20 0x01 0x02 0x03 ... 0x10"
+    },
+    { "cmd": "i2c_write_add", "descript": "perform write operation to i2c device with register address",
+      "parameters": [
+          { "device": "i2c slave device address" },
+          { "addr": "register address" },
+          { "data": "bytes to write" }
+      ],
+      "example": ">i2c_write 0x20 0x12 0x01 0x02 0x03 ... 0x10"
+    },
+    { "cmd": "spi_setup", "descript": "initial spi bus",
+      "parameters": [
+          { "clk_freq": "ispi clock frequence" },
+          { "sck_pin": "sck pin io number" },
+          { "mosi_pin": "mosi pin io number" },
+          { "miso_pin": "miso pin io number" },
+          { "cs_pin": "cs pin io number, -1 if don't want spi controller toggle cs pin" },
+          { "polarity": "polarity setting for spi bus" },
+          { "phase": "phase setting for spi bus" }
+      ],
+      "example": ">spi_setup 100000 2 3 0 1 0 1"
+    },
+    { "cmd": "spi_cleanup", "descript": "release spi bus" },
+    { "cmd": "spi_read", "descript": "perform read operation from spi device",
+      "parameters": [
+          { "length": "bytes to read" }
+      ],
+      "example": ">spi_read 3\n    <succeed: 0xFF 0xAA 0xBB"
+    },
+    { "cmd": "spi_write", "descript": "perform write operation to spi device ",
+      "parameters": [
+          { "data": "bytes to write" }
+      ],
+      "example": ">spi_write 0x01 0x02 0x03 ... 0x10"
+    },
+    { "cmd": "spi_write_read", "descript": "perform write and then read to spi device ",
+      "parameters": [
+          { "length": "bytes to read" },
+          { "data": "bytes to write" }
+      ],
+      "example": ">spi_write_read 3 0x01 0x02 0x03 ... 0x10\n    <succeed: 0xFF 0xAA 0xBB"
+    },
+]
+
+
+##########################################################
+def load_config():
+    global config
+    
+    try:
+        f = open(config_file,'r')
+        config = json.load(f)
+        f.close()
+    except:
+        print('config file not exist, load default settings!')
+        save_config()
+        
+def save_config():
+    f = open(config_file,'w')
+    json.dump(config, f)
+    f.close()
+
+def bytes_to_str(bytes):
+    return ",".join([f"0x{b:02x}" for b in bytes])
+
+def str_to_int(str):
+    if str.startswith("0x"):
+        return int(str, 16)
+    else:
+        return int(str, 10)
+    
+def print_help():
+    for command in command_info:
+        print(f"{command['cmd']} - {command['descript']}")
+        if 'parameters' in command.keys():
+            print('  parameters:')
+            for parameter in command['parameters']:
+                parameter_name = list(parameter.keys())[0]
+                print(f"    {parameter_name}: {parameter[parameter_name]}")
+        if 'example' in command.keys():
+            print('  example:')
+            print(f'    {command['example']}')
+        if 'parameters' in command.keys() or 'example' in command.keys():
+            print('')
+        
+##########################################################
+
+load_config()
+
+i2c_controller = None
+spi_controller = None
+spi_cs_pin = None
+gpio_dict = {}
+
+print('Sonos Micro Controller V1.0')
+print("PyLang", sys.version_info, ";", sys.implementation)
+print('=======================================')
+while True:
+    input_string = str(input())
+    args = input_string.split(" ")
+  
+    if len(args) >= 1:
+        if args[0] == 'help' or args[0] == '?':
+            print_help()            
+        elif args[0] == 'ping': # check if command line is available
+            print('OK')
+        elif args[0] == 'reset':
+            machine.reset()
+        elif args[0] == 'get_config':
+            print(config)     
+        elif args[0] == 'set_config':
+            if args[1] != None and args[2] != None:
+                config[args[1]] = args[2]
+                save_config()            
+            else:
+                print('invalid arguments for set command: ', input_string)
+
+        ######################################################################
+        ##  GPIO control commands
+        ######################################################################
+        elif args[0] == 'gpio_init':
+            # gpio_init 1 1 1 UP
+            try:
+                pin_num = str_to_int(args[1])
+                pin_direction = machine.Pin.OUT if str_to_int(args[2]) == 1 else machine.Pin.IN
+                init_status = str_to_int(args[3])
+                pull_control = None
+                if len(args) >= 5:
+                    if args[4].upper().strip() == 'UP':
+                        pull_control = machine.Pin.PULL_UP
+                    elif args[4].upper().strip() == 'DOWN':
+                        pull_control = machine.Pin.PULL_DOWN
+                    else:
+                        print('failed: invalid pull control ', args[4])
+                gpio_dict[pin_num] = machine.Pin(pin_num, pin_direction, pull_control)
+                if pin_direction == machine.Pin.OUT:
+                    gpio_dict[pin_num].value(init_status)
+                print('succeed: ', gpio_dict[pin_num])
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'gpio_set':
+            try:
+                pin_num = str_to_int(args[1])
+                pin_status = str_to_int(args[2])
+                if pin_num in gpio_dict:
+                    gpio_dict[pin_num].value(pin_status)
+                    print('succeed: ')
+                else:
+                    print(f'failed: pin not initialized - {pin_num}')
+            except Exception as e:
+                print('failed: ', e)
+        elif args[0] == 'gpio_get':
+            try:
+                pin_num = str_to_int(args[1])
+                if pin_num in gpio_dict:
+                    print('succeed: ', gpio_dict[pin_num].value())
+                else:
+                    print(f'failed: pin not initialized - {pin_num}')
+            except Exception as e:
+                print('failed: ', e)
+        ######################################################################
+        ##  I2C controller commands
+        ######################################################################
+        elif args[0] == 'i2c_setup':
+            # ====== i2c controller setup ======
+            # PiPico: i2c_setup 100000 0 1		# 100000 - i2c clock frequence, 0 - sda pin io number, 1 - scl pin io number
+            # ESP32:  i2c_setup 100000 8 9		# 100000 - i2c clock frequence, 8 - sda pin io number, 9 - scl pin io number
+            try:
+                if i2c_controller is not None:
+                    i2c_controller = None
+                clk_freq = str_to_int(args[1])
+                sda_pin = str_to_int(args[2])
+                scl_pin = str_to_int(args[3])
+                i2c_controller = machine.I2C(0, sda=machine.Pin(sda_pin, machine.Pin.OPEN_DRAIN, machine.Pin.PULL_UP), scl=machine.Pin(scl_pin, machine.Pin.OUT, machine.Pin.PULL_UP), freq=clk_freq) # Frequency in Hz
+                print('succeed: ', i2c_controller)
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'i2c_cleanup':
+            # ====== i2c controller setup ======
+            try:
+                if i2c_controller is not None:
+                    i2c_controller = None
+                print('succeed: ')
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'i2c_scan':
+            # ====== scan I2C devices ======
+            try:
+                devices = i2c_controller.scan()
+                if len(devices) == 0:
+                    print('failed: ', "no I2C devices found")
+                else:
+                    print('succeed: ', bytes_to_str(devices))
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'i2c_read':
+            # ====== i2c data read ======
+            # i2c_read 0x20 1   	# 0x20 - device_address, 1 - read length
+            try:
+                device = str_to_int(args[1])
+                length = str_to_int(args[2])
+                data = i2c_controller.readfrom(device, length)
+                print('succeed: ', data.hex(','))
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'i2c_read_add':
+            # ====== i2c data read address ======
+            # i2c_read_add 0x20 0 2 	# 0x20 - device_address, 0 - register address, 2 - read length
+            try:
+                device = str_to_int(args[1])
+                addr = str_to_int(args[2])
+                length = str_to_int(args[3])
+                data = i2c_controller.readfrom_mem(device, addr, length)
+                print('succeed: ', bytes_to_str(data))
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'i2c_write':
+            # ====== i2c data write ======
+            # i2c_write 0x20 0x01 0x02 0x03 ... 0x10	# 0x20 - device_address, 0x01 ~ 0x10 - data to write to device
+            try:
+                device = str_to_int(args[1])
+                data = bytearray()
+                for i in range(2, len(args)):
+                    data.append(str_to_int(args[i]))
+                i2c_controller.writeto(device, data)
+                print('succeed: ')
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'i2c_write_add':
+            # ====== i2c data write address ======
+            # i2c_write_add 0x20 0x12 0x01 0x02 0x03 ... 0x10	# 0x20 - device_address, 0x12 - register address, 0x01 ~ 0x10 - data to write to device
+            try:
+                device = str_to_int(args[1])
+                addr = str_to_int(args[2])
+                data = bytearray()
+                for i in range(3, len(args)):
+                    data.append(str_to_int(args[i]))
+                i2c_controller.writeto_mem(device, addr, data)
+                print('succeed: ')
+            except Exception as e:
+                print('failed: ', e)
+                
+        ######################################################################
+        ##  SPI controller commands
+        ######################################################################
+        elif args[0] == 'spi_setup':
+            # ====== spi controller setup ======
+            # PiPico: spi_setup 100000 2 3 0 1 0 1      # param#1: 100000 - spi clock frequence
+            #                                           # param#2: 2 - sck pin io number
+            #                                           # param#3: 3 - mosi pin io number
+            #                                           # param#4: 0 - miso pin io number
+            #                                           # param#5: 1 - cs pin io number, -1 if don't want spi controller toggle cs pin
+            #                                           # param#6: 0 - polarity setting
+            #                                           # param#7: 1 - phase setting
+            #
+
+            try:
+                if spi_controller is not None:
+                    spi_controller = None
+                if spi_cs_pin is not None:
+                    spi_cs_pin = None
+                
+                clk_freq = str_to_int(args[1])
+                                
+                spi_sck_pin = machine.Pin(str_to_int(args[2]))
+                spi_mosi_pin = machine.Pin(str_to_int(args[3]))
+                spi_miso_pin = machine.Pin(str_to_int(args[4]))
+                spi_cs_pin = machine.Pin(str_to_int(args[5]), machine.Pin.OUT)
+                polarity = str_to_int(args[6])
+                phase = str_to_int(args[7])
+
+                spi_controller = machine.SPI(0, baudrate=clk_freq, polarity=polarity, phase=phase, sck=spi_sck_pin, mosi=spi_mosi_pin, miso=spi_miso_pin)
+                print('succeed: ', spi_controller)
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'spi_cleanup':
+            # ====== spi controller setup ======
+            try:
+                if spi_controller is not None:
+                    spi_controller = None
+                if spi_cs_pin is not None:
+                    spi_cs_pin = None
+                    
+                print('succeed: ')
+            except Exception as e:
+                print('failed: ', e)
+                
+        elif args[0] == 'spi_read':
+            # ====== spi data read ======
+            # spi_read 3   	# 3 - read length
+            try:
+                length = str_to_int(args[1])
+                
+                # active cs pin if required
+                if spi_cs_pin is not None:
+                    spi_cs_pin.value(0)
+                    
+                data = spi_controller.read(length)
+                
+                # deactive cs pin if required
+                if spi_cs_pin is not None:
+                    spi_cs_pin.value(1)
+                    
+                print('succeed: ', data.hex(','))
+            except Exception as e:
+                print('failed: ', e)
+                     
+        elif args[0] == 'spi_write':
+            # ====== spi data write ======
+            # spi_write 0x01 0x02 0x03 ... 0x10	# 0x01 ~ 0x10 - data to write to device
+            try:
+                data = bytearray()
+                for i in range(1, len(args)):
+                    data.append(str_to_int(args[i]))
+                    
+                # active cs pin if required
+                if spi_cs_pin is not None:
+                    spi_cs_pin.value(0)
+                    
+                spi_controller.write(data)
+                
+                # deactive cs pin if required
+                if spi_cs_pin is not None:
+                    spi_cs_pin.value(1)
+                    
+                print('succeed: ')
+            except Exception as e:
+                print('failed: ', e)
+
+        elif args[0] == 'spi_write_read':
+            # ====== spi data read ======
+            # spi_write_read 3 0x01 0x02 0x03 ... 0x10	# 3 - read length, 0x01 ~ 0x10 - data to write to device
+            try:
+                read_length = str_to_int(args[1])
+                
+                # active cs pin if required
+                if spi_cs_pin is not None:
+                    spi_cs_pin.value(0)
+
+                write_data = bytearray()
+                for i in range(2, len(args)):
+                    write_data.append(str_to_int(args[i]))
+
+                spi_controller.write(write_data)
+                read_data = spi_controller.read(read_length)
+                
+                # deactive cs pin if required
+                if spi_cs_pin is not None:
+                    spi_cs_pin.value(1)
+                    
+                print('succeed: ', read_data.hex(','))
+            except Exception as e:
+                print('failed: ', e)
+        else:
+            print('unknow command: ', args[0])
+    

Boyi Airleak (LV2018 32bits)/Boyi_Airleak.aliases

@@ -1,3 +1,3 @@
 [My Computer]
-My Computer = "172.20.6.234"
+My Computer = "192.168.189.1"
 

Boyi Airleak (LV2018 32bits)/Boyi_Airleak.lvproj

@@ -118,7 +118,7 @@
 				<Property Name="Destination[1].destName" Type="Str">Support Directory</Property>
 				<Property Name="Destination[1].path" Type="Path">../builds/NI_AB_PROJECTNAME/Boyi_Airleak</Property>
 				<Property Name="DestinationCount" Type="Int">2</Property>
-				<Property Name="Source[0].itemID" Type="Str">{F7A1B2B7-1F75-4035-9780-1FD0539777FD}</Property>
+				<Property Name="Source[0].itemID" Type="Str">{FAB75C3B-4DE3-4C7E-8E11-DF5BC1395959}</Property>
 				<Property Name="Source[0].type" Type="Str">Container</Property>
 				<Property Name="Source[1].destinationIndex" Type="Int">0</Property>
 				<Property Name="Source[1].itemID" Type="Ref">/My Computer/Boyi_AirLeakTest.vi</Property>

Boyi Airleak Rel1 (LV2018 32bits)/Boyi Airleak Test.aliases

@@ -1,2 +1,3 @@
 [My Computer]
-My Computer = "192.168.56.1"
+My Computer = "192.168.189.1"
+

Boyi Airleak Rel1 (LV2018 32bits)/Boyi Airleak Test.lvlps

@@ -1,11 +1,11 @@
 [ProjectWindow_Data]
-ProjectExplorer.ClassicPosition[String] = "122,1095,750,1706"
+ProjectExplorer.ClassicPosition[String] = "59,2036,687,2647"
 
-[AB_Cache_{796D7191-C432-47E7-AEE9-9E35637FEE0F}]
+[AB_Cache_{B8F52674-5859-47DA-8D81-080F55E0F424}]
-Cache_Path[Path] Line0001 = "/C/Users/wee/AppData/Local/Temp/AB_Cache_{796D7191"
+Cache_Path[Path] Line0001 = "/C/Users/wee/AppData/Local/Temp/AB_Cache_{B8F52674"
-Cache_Path[Path] Line0002 = "-C432-47E7-AEE9-9E35637FEE0F}.txt"
+Cache_Path[Path] Line0002 = "-5859-47DA-8D81-080F55E0F424}.txt"
 
-[AB_Cache_{18DF3938-90E1-49FE-869A-36578EADDB71}]
+[AB_Cache_{D0745400-408B-4D6D-B4B5-09629F97B805}]
-Cache_Path[Path] Line0001 = "/C/Users/wee/AppData/Local/Temp/AB_Cache_{18DF3938"
+Cache_Path[Path] Line0001 = "/C/Users/wee/AppData/Local/Temp/AB_Cache_{D0745400"
-Cache_Path[Path] Line0002 = "-90E1-49FE-869A-36578EADDB71}.txt"
+Cache_Path[Path] Line0002 = "-408B-4D6D-B4B5-09629F97B805}.txt"
 

Boyi Airleak Rel1 (LV2018 32bits)/Boyi Airleak Test.lvproj

@@ -10,7 +10,8 @@
 		<Property Name="server.vi.callsEnabled" Type="Bool">true</Property>
 		<Property Name="server.vi.propertiesEnabled" Type="Bool">true</Property>
 		<Property Name="specify.custom.address" Type="Bool">false</Property>
-		<Item Name="Boyi_AirLeakTest Rel1.vi" Type="VI" URL="../Boyi_AirLeakTest Rel1.vi"/>
+		<Item Name="Boyi_AirLeakTest Rel2.vi" Type="VI" URL="../Boyi_AirLeakTest Rel2.vi"/>
+		<Item Name="MESDll.dll" Type="Document" URL="../MESDll.dll"/>
 		<Item Name="Settings.ini" Type="Document" URL="../Settings.ini"/>
 		<Item Name="Dependencies" Type="Dependencies">
 			<Item Name="vi.lib" Type="Folder">
@@ -68,14 +69,13 @@
 			<Item Name="JSON_results_file_make_and_save.vi" Type="VI" URL="../SupportVIs/JSON_results_file_make_and_save.vi"/>
 			<Item Name="LuxShare_CheckStation.vi" Type="VI" URL="../SupportVIs/LuxShare_CheckStation.vi"/>
 			<Item Name="LuxShare_SaveResult.vi" Type="VI" URL="../SupportVIs/LuxShare_SaveResult.vi"/>
-			<Item Name="MESDll.dll" Type="Document" URL="../SupportVIs/MESDll.dll"/>
 			<Item Name="MesInterfacelib.dll" Type="Document" URL="../SupportVIs/LuxshareMES/Debug/MesInterfacelib.dll"/>
 			<Item Name="Sorting_Serial_Read.vi" Type="VI" URL="../SupportVIs/Sorting_Serial_Read.vi"/>
 			<Item Name="StringToHex.vi" Type="VI" URL="../SupportVIs/StringToHex.vi"/>
 			<Item Name="UTF8 LV80.vi" Type="VI" URL="../SupportVIs/UTF8 LV80.vi"/>
 		</Item>
 		<Item Name="Build Specifications" Type="Build">
-			<Item Name="Boyi Airleak Rel 1 Installer" Type="Installer">
+			<Item Name="Boyi Airleak Rel 2 Installer" Type="Installer">
 				<Property Name="Destination[0].name" Type="Str">Boyi Airleak Test</Property>
 				<Property Name="Destination[0].parent" Type="Str">{3912416A-D2E5-411B-AFEE-B63654D690C0}</Property>
 				<Property Name="Destination[0].tag" Type="Str">{7B893F76-DB9F-4AEC-833B-2D928504EF09}</Property>
@@ -132,14 +132,14 @@
 				<Property Name="DistPart[2].upgradeCode" Type="Str">{3B195EBF-4A09-46E6-8EAD-931568C1344C}</Property>
 				<Property Name="DistPartCount" Type="Int">3</Property>
 				<Property Name="INST_autoIncrement" Type="Bool">true</Property>
-				<Property Name="INST_buildLocation" Type="Path">../builds/Boyi Airleak Test Rel 1/Boyi Airleak Rel 1 Installer</Property>
+				<Property Name="INST_buildLocation" Type="Path">../builds/Boyi Airleak Test Rel 2/Boyi Airleak Rel 2 Installer</Property>
 				<Property Name="INST_buildLocation.type" Type="Str">relativeToCommon</Property>
-				<Property Name="INST_buildSpecName" Type="Str">Boyi Airleak Rel 1 Installer</Property>
+				<Property Name="INST_buildSpecName" Type="Str">Boyi Airleak Rel 2 Installer</Property>
 				<Property Name="INST_defaultDir" Type="Str">{7B893F76-DB9F-4AEC-833B-2D928504EF09}</Property>
-				<Property Name="INST_productName" Type="Str">Boyi Airleak Test Rel 1</Property>
+				<Property Name="INST_productName" Type="Str">Boyi Airleak Test Rel 2</Property>
-				<Property Name="INST_productVersion" Type="Str">1.0.3</Property>
+				<Property Name="INST_productVersion" Type="Str">1.0.5</Property>
 				<Property Name="InstSpecBitness" Type="Str">32-bit</Property>
-				<Property Name="InstSpecVersion" Type="Str">18008007</Property>
+				<Property Name="InstSpecVersion" Type="Str">18008012</Property>
 				<Property Name="MSI_autoselectDrivers" Type="Bool">true</Property>
 				<Property Name="MSI_distID" Type="Str">{F220AF39-DFF4-42DA-8468-607C9471CB6B}</Property>
 				<Property Name="MSI_hideNonRuntimes" Type="Bool">true</Property>
@@ -151,60 +151,61 @@
 				<Property Name="RegDestCount" Type="Int">1</Property>
 				<Property Name="Source[0].dest" Type="Str">{7B893F76-DB9F-4AEC-833B-2D928504EF09}</Property>
 				<Property Name="Source[0].File[0].dest" Type="Str">{7B893F76-DB9F-4AEC-833B-2D928504EF09}</Property>
-				<Property Name="Source[0].File[0].name" Type="Str">Boyi Airleak Test.exe</Property>
+				<Property Name="Source[0].File[0].name" Type="Str">Boyi Airleak Test Rel2.exe</Property>
 				<Property Name="Source[0].File[0].Shortcut[0].destIndex" Type="Int">0</Property>
-				<Property Name="Source[0].File[0].Shortcut[0].name" Type="Str">Boyi Airleak Test</Property>
+				<Property Name="Source[0].File[0].Shortcut[0].name" Type="Str">Boyi Airleak Test Rel2</Property>
-				<Property Name="Source[0].File[0].Shortcut[0].subDir" Type="Str">Boyi Airleak Test</Property>
+				<Property Name="Source[0].File[0].Shortcut[0].subDir" Type="Str">Boyi Airleak Test Rel 1</Property>
 				<Property Name="Source[0].File[0].ShortcutCount" Type="Int">1</Property>
-				<Property Name="Source[0].File[0].tag" Type="Str">{3B38CC8E-D49F-4485-9E26-00AAEF33D0C1}</Property>
+				<Property Name="Source[0].File[0].tag" Type="Str">{DF6F6D4E-5304-46EC-9A7A-44717F8C9C95}</Property>
 				<Property Name="Source[0].FileCount" Type="Int">1</Property>
-				<Property Name="Source[0].name" Type="Str">Boyi Airleak Test Rel1</Property>
+				<Property Name="Source[0].name" Type="Str">Boyi Airleak Test Rel2</Property>
-				<Property Name="Source[0].tag" Type="Ref">/My Computer/Build Specifications/Boyi Airleak Test Rel1</Property>
+				<Property Name="Source[0].tag" Type="Ref">/My Computer/Build Specifications/Boyi Airleak Test Rel2</Property>
 				<Property Name="Source[0].type" Type="Str">EXE</Property>
 				<Property Name="SourceCount" Type="Int">1</Property>
 			</Item>
-			<Item Name="Boyi Airleak Test Rel1" Type="EXE">
+			<Item Name="Boyi Airleak Test Rel2" Type="EXE">
 				<Property Name="App_copyErrors" Type="Bool">true</Property>
-				<Property Name="App_INI_aliasGUID" Type="Str">{E948E052-E6A7-4C6E-8F23-5160D019BDCA}</Property>
+				<Property Name="App_INI_aliasGUID" Type="Str">{79E899CA-C107-442C-B645-DF13AD3BDC48}</Property>
-				<Property Name="App_INI_GUID" Type="Str">{9470399D-BA8C-4FDD-9920-A4C0BD0F4143}</Property>
+				<Property Name="App_INI_GUID" Type="Str">{4B4EF9EA-3AD3-4618-93FD-150F6B69C86A}</Property>
 				<Property Name="App_serverConfig.httpPort" Type="Int">8002</Property>
-				<Property Name="App_winsec.description" Type="Str">http://www.Sonos.com</Property>
 				<Property Name="Bld_autoIncrement" Type="Bool">true</Property>
-				<Property Name="Bld_buildCacheID" Type="Str">{796D7191-C432-47E7-AEE9-9E35637FEE0F}</Property>
+				<Property Name="Bld_buildCacheID" Type="Str">{B8F52674-5859-47DA-8D81-080F55E0F424}</Property>
-				<Property Name="Bld_buildSpecName" Type="Str">Boyi Airleak Test Rel1</Property>
+				<Property Name="Bld_buildSpecName" Type="Str">Boyi Airleak Test Rel2</Property>
 				<Property Name="Bld_excludeInlineSubVIs" Type="Bool">true</Property>
 				<Property Name="Bld_excludeLibraryItems" Type="Bool">true</Property>
 				<Property Name="Bld_excludePolymorphicVIs" Type="Bool">true</Property>
-				<Property Name="Bld_localDestDir" Type="Path">../builds/Boyi Airleak Test Rel 1/Boyi Airleak Test Rel1</Property>
+				<Property Name="Bld_localDestDir" Type="Path">../builds/NI_AB_PROJECTNAME/Boyi Airleak Test Rel2</Property>
 				<Property Name="Bld_localDestDirType" Type="Str">relativeToCommon</Property>
 				<Property Name="Bld_modifyLibraryFile" Type="Bool">true</Property>
-				<Property Name="Bld_previewCacheID" Type="Str">{18DF3938-90E1-49FE-869A-36578EADDB71}</Property>
+				<Property Name="Bld_previewCacheID" Type="Str">{D0745400-408B-4D6D-B4B5-09629F97B805}</Property>
-				<Property Name="Bld_version.build" Type="Int">4</Property>
+				<Property Name="Bld_version.build" Type="Int">14</Property>
 				<Property Name="Bld_version.major" Type="Int">1</Property>
-				<Property Name="Destination[0].destName" Type="Str">Boyi Airleak Test.exe</Property>
+				<Property Name="Destination[0].destName" Type="Str">Boyi Airleak Test Rel2.exe</Property>
-				<Property Name="Destination[0].path" Type="Path">../builds/Boyi Airleak Test Rel 1/Boyi Airleak Test Rel1/NI_AB_PROJECTNAME.exe</Property>
+				<Property Name="Destination[0].path" Type="Path">../builds/NI_AB_PROJECTNAME/Boyi Airleak Test Rel2/Boyi Airleak Test Rel2.exe</Property>
 				<Property Name="Destination[0].preserveHierarchy" Type="Bool">true</Property>
 				<Property Name="Destination[0].type" Type="Str">App</Property>
 				<Property Name="Destination[1].destName" Type="Str">Support Directory</Property>
-				<Property Name="Destination[1].path" Type="Path">../builds/Boyi Airleak Test Rel 1/Boyi Airleak Test Rel1</Property>
+				<Property Name="Destination[1].path" Type="Path">../builds/NI_AB_PROJECTNAME/Boyi Airleak Test Rel2</Property>
 				<Property Name="DestinationCount" Type="Int">2</Property>
-				<Property Name="Source[0].itemID" Type="Str">{6E14701C-1CE3-420A-8CEB-7A82A529FD25}</Property>
+				<Property Name="Source[0].itemID" Type="Str">{9B149762-A632-421B-B31E-791EB1694928}</Property>
 				<Property Name="Source[0].type" Type="Str">Container</Property>
 				<Property Name="Source[1].destinationIndex" Type="Int">0</Property>
-				<Property Name="Source[1].itemID" Type="Ref">/My Computer/Boyi_AirLeakTest Rel1.vi</Property>
+				<Property Name="Source[1].itemID" Type="Ref">/My Computer/Boyi_AirLeakTest Rel2.vi</Property>
 				<Property Name="Source[1].sourceInclusion" Type="Str">TopLevel</Property>
 				<Property Name="Source[1].type" Type="Str">VI</Property>
 				<Property Name="Source[2].destinationIndex" Type="Int">0</Property>
-				<Property Name="Source[2].itemID" Type="Ref">/My Computer/Settings.ini</Property>
+				<Property Name="Source[2].itemID" Type="Ref">/My Computer/MESDll.dll</Property>
 				<Property Name="Source[2].sourceInclusion" Type="Str">Include</Property>
-				<Property Name="SourceCount" Type="Int">3</Property>
+				<Property Name="Source[3].destinationIndex" Type="Int">0</Property>
-				<Property Name="TgtF_companyName" Type="Str">Sonos</Property>
+				<Property Name="Source[3].itemID" Type="Ref">/My Computer/Settings.ini</Property>
-				<Property Name="TgtF_fileDescription" Type="Str">Boyi Airleak Test Rel1</Property>
+				<Property Name="Source[3].sourceInclusion" Type="Str">Include</Property>
-				<Property Name="TgtF_internalName" Type="Str">Boyi Airleak Test Rel1</Property>
+				<Property Name="SourceCount" Type="Int">4</Property>
-				<Property Name="TgtF_legalCopyright" Type="Str">Copyright © 2023 Sonos</Property>
+				<Property Name="TgtF_fileDescription" Type="Str">Boyi Airleak Test Rel2</Property>
-				<Property Name="TgtF_productName" Type="Str">Boyi Airleak Test Rel1</Property>
+				<Property Name="TgtF_internalName" Type="Str">Boyi Airleak Test Rel2</Property>
-				<Property Name="TgtF_targetfileGUID" Type="Str">{3B38CC8E-D49F-4485-9E26-00AAEF33D0C1}</Property>
+				<Property Name="TgtF_legalCopyright" Type="Str">Copyright © 2026 </Property>
-				<Property Name="TgtF_targetfileName" Type="Str">Boyi Airleak Test.exe</Property>
+				<Property Name="TgtF_productName" Type="Str">Boyi Airleak Test Rel2</Property>
+				<Property Name="TgtF_targetfileGUID" Type="Str">{DF6F6D4E-5304-46EC-9A7A-44717F8C9C95}</Property>
+				<Property Name="TgtF_targetfileName" Type="Str">Boyi Airleak Test Rel2.exe</Property>
 				<Property Name="TgtF_versionIndependent" Type="Bool">true</Property>
 			</Item>
 		</Item>