[main Config]
debug = "true"
mic test = "false"
corr to ref mic = "false"
getsn = "ddputil"
GS List = ""
GS Path = "C:\Users\chanwee.hew\Documents\Labview Program\Acoustics Test\Mic-IQC\GS\PDM_Mic.dat"

[hardware config]
autostart = "COM7"
relay control = "com4"
mic vdd = ""
soundcard output = "Speakers (USB PnP Audio Device)"
soundcard input(max 4) = "Microphone (USB Advanced Audio Device)"

[Signal Config]
AddHead? = "false"
Head Freq = "1000"
amplitude = "0.050"
Sampling Rate = "48000"
StarFreq = "15000"
StopFreq = "50"
Min Cycles = "12"
Octave = "12"
Min Duration = "0.01"

[Play&Record Config]
playChannel(1:L 2:R) = "1"
delay before play(ms) = "200"
delay after play(ms) = "100"
recordChannels = "1"
add recording time(s) = "0.2"
save waveform = "false"
waveform path = "C:\Sonos\Pallas FA Test\PallasPlus_ChirpTest\waveform"

[Ref Mic Setting]
Ref Mic = "false"
soundcard input = "Microphone(USB PnP Audio Device)"
recordChannels(1:L 2:R) = "1"

[Analyze Config]
maximum harmonic = "5"
sensitivity start Hz = "1000"
sensitivity end Hz = "1000"
Smoothing Width = "1/3"
Units = "dBSPL"
Windowing = "false"
Start Freq = "100"
Stop Freq = "20000"

[Delta config]
Operand A = "FR - Smoothed DUT Mic1;Value - Sens DUT Mic1"
Operand B = "FR - Smoothed GS Mic1;Value - Sens GS Mic1"
Output = "FR - Delta Smoothed DUT Mic1;Value - Delta Sens DUT Mic1"

[Curve Limits]
Name = "Lim - Delta Smoothed DUT Mic1"
Upper Limit = "100,1.5,5000,1.5,5001,1.5,10000,1.5,15000,1.5,20000,2"
Lower Limit = "100,-1.5,5000,-1.5,5001,-1.5,10000,-1.5,15000,-1.5,20000,-2"

[single limits]
Name = "Lim - Sens DUT Mic1"
Upper Limit = "10"
Lower Limit = "-10"

[autosave]
StationNum = "MicTest001"
ProductName = "PDM Mic"
TestName = "Mic IQC"
json Path = "C:\IDU_MFG_OUTGOING"
backup = "true"
TMS = "false"
GSSN Path = ""
MES Path = ""

[DUT Play Config]
DUT IP = ""
set mode = ""
Vol = "60"
Wave Filename = ""